Daikin / AURORA R-32
Daikin L6 error code
L6 means the outdoor unit is detecting a compressor motor ground/short condition. This is an electrical safety and compressor-drive diagnosis.
- Urgency
- advisory
- Verified
- Jul 30, 2026
- Fix path
- Technician
What it means
L6 means the outdoor unit is detecting a compressor motor ground/short condition. This is an electrical safety and compressor-drive diagnosis.
Urgency
advisory
This is not usually an immediate safety hazard, but do not keep resetting it. Try the safe homeowner check below; if the code comes back, schedule service.
Likely causes
- Brief power event, brownout, or unstable supply voltage
- Loose power connection, reactor, or outdoor electrical component problem
- Inverter/IPM protection or current-detection fault
- Compressor winding, drive, or outdoor board fault after power checks pass
Homeowner fix
Leave the system off after one failed reset. Do not open the outdoor cabinet or keep trying to start the compressor.
When to call a pro
Call a licensed HVAC technician if L6 appears. Tell them the MXM table lists compressor motor ground/short circuit.
This code points to compressor and electrical or inverter work - get repair quotes from contractors in your area.
Get repair quotesRepair vs replace
A confirmed compressor ground fault or inverter short is a major repair. Compare the quote with replacement, especially outside warranty.
See Daikin mini-splitsYour Daikin model
AURORA R-32 model pages in the Daikin catalog help compare this repair path with current replacement options.
- Daikin AURORA 9,000 BTU R-32 208/230V (FTXV09AVJU9 / RXT09AVJU9)
AURORA R-32
- Daikin AURORA 12,000 BTU R-32 208/230V (FTXV12AVJU9 / RXT12AVJU9)
AURORA R-32
- Daikin AURORA 15,000 BTU R-32 208/230V (FTXV15AVJU9 / RXT15AVJU9)
AURORA R-32
- Daikin AURORA 18,000 BTU R-32 208/230V (FTXV18AVJU9 / RXT18AVJU9)
AURORA R-32
Parts for this line
The parts catalog for Daikin AURORA R-32 lists 7 sourced replacement parts for this product line.
Open parts pageFor your technician
Technician note: test compressor insulation, leads, terminals, IPM/power unit, and outdoor PCB before deciding repair scope. Page context: Daikin maps this display to the AURORA R-32 line; source: Daikin Nineteen, ATMOSPHERA, Entra, and MXM/MXT/MXTH local service manuals; display convention: match the letter L and six marker exactly before comparing neighboring codes.
Which systems show it
- Daikin current US residential R-32 ductless single-zone systems, including AURORA R-32, ATMOSPHERA R-32, Entra R32, OTERRA R-32, and Nineteen-series style high-wall diagnostics where the same Daikin A/C/E/F/H/J/L/P/U code family is used.
- Daikin concealed-duct/FDMQ indoor units where the Nineteen service manual explicitly lists the same indoor drain, fan PCB, remote-controller, and FDMQ-only C/U codes.
- Daikin AURORA Multi R-32 and Standard Multi R-32 MXT/MXTH/MXM systems where the MXM engineering manual lists the same homeowner code table.
- MXM/MXT/MXTH multi-zone systems for the additional multi-zone U-series and inverter/control codes specifically called out from the MXM manual.
Related troubleshooting
Use the symptom guide alongside the exact display code if the unit is flashing, cycling, or showing comfort symptoms.
Reset note
Leave the system off after one failed reset. Do not open the outdoor cabinet or keep trying to start the compressor.
Manual trigger
L6 means the outdoor unit is detecting a compressor motor ground/short condition. This is an electrical safety and compressor-drive diagnosis.
Related codes
Source
- Section
- BRC944B2 operation, malfunction code table
- Page
- PDF pages 267-269
Short quote: "Malfunction code Error content"
Sourced Jul 2026