Daikin UH error code

What it means

UH is a broad Daikin system fault in the MXM/control table. It says the system relationship needs diagnosis, but it does not name a homeowner-serviceable part.

Urgency

Likely causes

1. Indoor/outdoor communication wiring or terminal problem
2. Loose low-voltage connector after service or vibration
3. Power interruption during the control handshake
4. Indoor or outdoor control board fault after wiring is verified

Homeowner fix

Turn the system off, note all displayed codes and affected rooms, and reset once only if safe. If UH returns, leave the system off until service.

When to call a pro

Call a licensed HVAC technician if UH returns. Tell them the MXM table lists UH as system fault and provide all indoor/outdoor model numbers.

Repair vs replace

A system fault is usually setup or repair work. Compare replacement only if a major board or incompatible equipment combination is confirmed.

• Daikin AURORA 9,000 BTU R-32 208/230V (FTXV09AVJU9 / RXT09AVJU9)

  AURORA R-32

• Daikin AURORA 12,000 BTU R-32 208/230V (FTXV12AVJU9 / RXT12AVJU9)

  AURORA R-32

• Daikin AURORA 15,000 BTU R-32 208/230V (FTXV15AVJU9 / RXT15AVJU9)

  AURORA R-32

• Daikin AURORA 18,000 BTU R-32 208/230V (FTXV18AVJU9 / RXT18AVJU9)

  AURORA R-32

Parts for this line

The parts catalog for Daikin AURORA R-32 lists 7 sourced replacement parts for this product line.

For your technician

Technician note: use MXM system diagnostics to verify combination, addressing, controller grouping, communication wiring, and boards. Page context: Daikin maps this display to the AURORA R-32 line; source: Daikin Nineteen, ATMOSPHERA, Entra, and MXM/MXT/MXTH local service manuals; display convention: match the letter U and letter H marker exactly before comparing neighboring codes.

Which systems show it

• Daikin current US residential R-32 ductless single-zone systems, including AURORA R-32, ATMOSPHERA R-32, Entra R32, OTERRA R-32, and Nineteen-series style high-wall diagnostics where the same Daikin A/C/E/F/H/J/L/P/U code family is used.
• Daikin concealed-duct/FDMQ indoor units where the Nineteen service manual explicitly lists the same indoor drain, fan PCB, remote-controller, and FDMQ-only C/U codes.
• Daikin AURORA Multi R-32 and Standard Multi R-32 MXT/MXTH/MXM systems where the MXM engineering manual lists the same homeowner code table.
• MXM/MXT/MXTH multi-zone systems for the additional multi-zone U-series and inverter/control codes specifically called out from the MXM manual.

Related troubleshooting

Use the symptom guide alongside the exact display code if the unit is flashing, cycling, or showing comfort symptoms.

Reset note

Turn the system off, note all displayed codes and affected rooms, and reset once only if safe. If UH returns, leave the system off until service.

Manual trigger

UH is a broad Daikin system fault in the MXM/control table. It says the system relationship needs diagnosis, but it does not name a homeowner-serviceable part.

Related codes

Source

Next step