Senville / LETO Series
Senville EH00 error code
EH00 means the indoor control board is not getting valid feedback from its EEPROM memory. This usually appears after installation, service, or a board fault.
- Urgency
- advisory
- Verified
- Jul 31, 2026
- Fix path
- Technician
What it means
EH00 means the indoor control board is not getting valid feedback from its EEPROM memory. This usually appears after installation, service, or a board fault.
Urgency
advisory
This is not usually an immediate safety hazard, but do not keep resetting it. Try the safe homeowner check below; if the code comes back, schedule service.
Likely causes
- Temporary indoor control memory fault
- Indoor board setup or installation mistake
- Indoor EEPROM feedback fault
- Indoor PCB failure
Homeowner fix
Turn the system off with the remote, then power cycle once at the breaker or disconnect if you can do that safely. Expected result: a temporary control fault clears; if the code returns, stop resetting and schedule service.
When to call a pro
Call a licensed HVAC technician if EH00 returns after one reset. Tell them the manual points to the indoor EEPROM circuit.
This code points to electrical or inverter work - get repair quotes from contractors in your area.
Get repair quotesRepair vs replace
Sensor and communication faults are usually repairable. Compare repair with replacement only if the system is older, out of warranty, or multiple boards/sensors are being quoted together.
See Senville mini-splitsYour Senville model
LETO Series model pages in the Senville catalog help compare this repair path with current replacement options.
- Senville LETO 9,000 BTU R-454B 115V (SENL-09CD-ILL / SENL-09CD-OL)
LETO Series
- Senville LETO 9,000 BTU R-454B 208/230V (SENL-09CD220-ILL / SENL-09CD220-OL)
LETO Series
- Senville LETO 12,000 BTU R-454B 115V (SENL-12CD-ILL / SENL-12CD-OL)
LETO Series
- Senville LETO 12,000 BTU R-454B 208/230V (SENL-12CD220-ILL / SENL-12CD220-OL)
LETO Series
Parts for this line
The parts catalog for Senville LETO Series lists 10 sourced replacement parts for this product line.
Open parts pageFor your technician
Technician note: section 7.4.1.1 lists installation mistake and faulty PCB for indoor EEPROM feedback failure. Page context: Senville maps this display to the LETO Series line; source: Senville LETO Series Error Code Reference Guide plus official EL 0C and PC 0L support articles; display convention: match the letter E, letter H, and zero marker exactly before comparing neighboring codes.
Which systems show it
LETO Series
Related troubleshooting
Use the symptom guide alongside the exact display code if the unit is flashing, cycling, or showing comfort symptoms.
Related codes
Source
- Document
- Senville LETO Series Error Code Reference Guide plus official EL 0C and PC 0L support articles