SplitAtlas

Senville / LETO Series

Senville PC01 error code

PC01 means the outdoor unit saw supply voltage or DC bus voltage outside the expected range. It may be a utility/brownout issue, wiring issue, or outdoor-board fault.

Urgency
advisory
Verified
Jul 31, 2026
Fix path
Technician

What it means

PC01 means the outdoor unit saw supply voltage or DC bus voltage outside the expected range. It may be a utility/brownout issue, wiring issue, or outdoor-board fault.

Urgency

advisory

This is not usually an immediate safety hazard, but do not keep resetting it. Try the safe homeowner check below; if the code comes back, schedule service.

Likely causes

  1. Brownout, surge, or unstable supply voltage
  2. Outdoor disconnect or breaker issue
  3. Reactor, rectifier, or DC bus problem
  4. Outdoor PCB voltage-detection fault

Homeowner fix

Turn the system off and note whether lights dimmed, storms occurred, or other appliances had power trouble. Reset once only after power is stable. If PC01 returns or any breaker trips, stop there.

When to call a pro

Call a licensed HVAC technician or electrician if PC01 returns, a breaker trips, or other circuits show voltage trouble. Tell them the code is outdoor voltage protection.

This code points to electrical or inverter work - get repair quotes from contractors in your area.

Get repair quotes

Repair vs replace

This is normally a repair diagnosis, not an automatic replacement signal. If a technician confirms a major board, compressor, fan motor, or refrigerant-circuit repair on older out-of-warranty equipment, compare the quote with replacement.

See Senville mini-splits

Your Senville model

LETO Series model pages in the Senville catalog help compare this repair path with current replacement options.

Parts for this line

The parts catalog for Senville LETO Series lists 10 sourced replacement parts for this product line.

Open parts page

For your technician

Technician note: section 7.4.2.5 covers E5/PC10/PC11/PC12 voltage rise/drop detection; verify supply and DC bus before replacing boards. Page context: Senville maps this display to the LETO Series line; source: Senville LETO Series Error Code Reference Guide plus official EL 0C and PC 0L support articles; display convention: match the letter P, letter C, and one marker exactly before comparing neighboring codes.

Which systems show it

LETO Series

Related troubleshooting

Use the symptom guide alongside the exact display code if the unit is flashing, cycling, or showing comfort symptoms.

Related codes

Source

Senville LETO Series Error Code Reference Guide plus official EL 0C and PC 0L support articles
Document
Senville LETO Series Error Code Reference Guide plus official EL 0C and PC 0L support articles
Sourced Jul 2026

Next step