SplitAtlas

Senville / LETO Series

Senville PC04 error code

PC04 means the outdoor inverter drive could not operate the compressor normally. This can involve the compressor, IPM, outdoor board, or drive wiring.

Urgency
advisory
Verified
Jul 31, 2026
Fix path
Technician

What it means

PC04 means the outdoor inverter drive could not operate the compressor normally. This can involve the compressor, IPM, outdoor board, or drive wiring.

Urgency

advisory

This is not usually an immediate safety hazard, but do not keep resetting it. Try the safe homeowner check below; if the code comes back, schedule service.

Likely causes

  1. Temporary compressor-drive trip
  2. Outdoor inverter/IPM fault
  3. Compressor electrical or mechanical fault
  4. Outdoor PCB or wiring fault

Homeowner fix

Turn the system off with the remote, then power cycle once at the breaker or disconnect if you can do that safely. Expected result: a temporary control fault clears; if the code returns, stop resetting and schedule service.

When to call a pro

Call a licensed HVAC technician if PC04 returns after one reset or the outdoor unit will not start. Tell them the code is inverter compressor drive error.

This code points to compressor and electrical or inverter work - get repair quotes from contractors in your area.

Get repair quotes

Repair vs replace

This is normally a repair diagnosis, not an automatic replacement signal. If a technician confirms a major board, compressor, fan motor, or refrigerant-circuit repair on older out-of-warranty equipment, compare the quote with replacement.

See Senville mini-splits

Your Senville model

LETO Series model pages in the Senville catalog help compare this repair path with current replacement options.

Parts for this line

The parts catalog for Senville LETO Series lists 10 sourced replacement parts for this product line.

Open parts page

For your technician

Technician note: service manual section 7.4.1.8 says compressor drive troubleshooting follows IPM module protection; diagnose compressor, IPM, wiring, and outdoor PCB. Page context: Senville maps this display to the LETO Series line; source: Senville LETO Series Error Code Reference Guide plus official EL 0C and PC 0L support articles; display convention: match the letter P, letter C, and four marker exactly before comparing neighboring codes.

Which systems show it

LETO Series

Related troubleshooting

Use the symptom guide alongside the exact display code if the unit is flashing, cycling, or showing comfort symptoms.

Related codes

Source

Senville LETO Series Error Code Reference Guide plus official EL 0C and PC 0L support articles
Document
Senville LETO Series Error Code Reference Guide plus official EL 0C and PC 0L support articles
Sourced Jul 2026

Next step