Blueridge FHCC error code

What it means

FHCC means the indoor unit has detected a refrigerant sensor malfunction. The manual says the sensor cannot be repaired and must be replaced with the manufacturer-specified sensor.

Urgency

Likely causes

1. Refrigerant sensor malfunction
2. Failed refrigerant sensor module
3. Sensor at or beyond its service life
4. Sensor harness or connector problem

Homeowner fix

Power cycle once only if safe. If FHCC remains or returns, leave the unit off and do not open the indoor unit.

When to call a pro

Call a licensed HVAC technician if FHCC appears. Tell them the Blueridge manual identifies FHCC as refrigerant sensor malfunction.

Repair vs replace

Sensor replacement is normally the right repair. Full system replacement is rarely justified unless the unit has other major failures.

• Blueridge XS2 Core 9,000 BTU R-454B 115V (BXS2A09WMV / BXS2A09SCV)

  Blueridge XS2 Core

• Blueridge XS2 Core 9,000 BTU R-454B 208/230V (BXS2A09WM0 / BXS2A09SC0)

  Blueridge XS2 Core

• Blueridge XS2 Core 12,000 BTU R-454B 115V (BXS2A12WMV / BXS2A12SCV)

  Blueridge XS2 Core

• Blueridge XS2 Core 12,000 BTU R-454B 208/230V (BXS2A12WM0 / BXS2A12SC0)

  Blueridge XS2 Core

For your technician

Technician note: verify the sensor harness and operating conditions, then replace a failed sensor only with the manufacturer-specified part; do not attempt sensor repair. Page context: Blueridge maps this display to the Blueridge XS2 Core line; source: manufacturer documentation; display convention: match the letter F, letter H, letter C, and letter C marker exactly before comparing neighboring codes.

Which systems show it

Blueridge XS2 Core

Related troubleshooting

Use the symptom guide alongside the exact display code if the unit is flashing, cycling, or showing comfort symptoms.

Related codes

Source

Next step