Carrier / Comfort 22
Carrier EH0B error code
EH0B means the indoor main control board and indoor display board are not exchanging the expected signal. The remote may still light up, but the unit controls cannot coordinate correctly.
- Urgency
- advisory
- Verified
- Jul 31, 2026
- Fix path
- Technician
What it means
EH0B means the indoor main control board and indoor display board are not exchanging the expected signal. The remote may still light up, but the unit controls cannot coordinate correctly.
Urgency
advisory
Try only the safe reset/check in the owner's manual. If the code returns, stop using the system until it is diagnosed.
Likely causes
- Carrier Table 4 identifies EH0b as communication error between indoor main control and display boards.
- A wiring/board communication fault that does not clear after the manual's wait/reset guidance.
Homeowner fix
Turn the system off with the remote, wait about 10 minutes, then power cycle once at the breaker or disconnect if you can do that safely. If the code returns, stop resetting and schedule service. Do not open the indoor or outdoor cabinet.
When to call a pro
Call a licensed HVAC technician if EH0B returns. Tell them Carrier identifies EH0b as communication between the indoor main control and display boards.
This code points to electrical or inverter work - get repair quotes from contractors in your area.
Get repair quotesRepair vs replace
This is normally a repair diagnosis, not an automatic replacement signal. If a technician confirms a major board, compressor, fan-motor, or sealed-system repair on older out-of-warranty equipment, compare the quote with replacement.
See Carrier mini-splitsYour Carrier model
Comfort 22 model pages in the Carrier catalog help compare this repair path with current replacement options.
- Carrier Comfort 22 9,000 BTU R-454B 115V (45MHHAQ09XC1 / 37MHRAQ09AA1)
Comfort 22
- Carrier Comfort 22 9,000 BTU R-454B 208/230V (45MHHAQ09XC3 / 37MHRAQ09AA3)
Comfort 22
- Carrier Comfort 22 12,000 BTU R-454B 115V (45MHHAQ12XC1 / 37MHRAQ12AA1)
Comfort 22
- Carrier Comfort 22 12,000 BTU R-454B 208/230V (45MHHAQ12XC3 / 37MHRAQ12AA3)
Comfort 22
For your technician
Technician note: verify indoor display harness, connectors, display board, indoor main PCB, and indoor power/ground reference. Page context: Carrier maps this display to the Comfort 22 line; source: Carrier 45MHHAQ High Wall Heat Pump Owner's Manual, Table 4 Error Codes; display convention: match the letter E, letter H, zero, and letter B marker exactly before comparing neighboring codes.
Which systems show it
Comfort 22
Related troubleshooting
Use the symptom guide alongside the exact display code if the unit is flashing, cycling, or showing comfort symptoms.
Related codes
Source
- Document
- Carrier 45MHHAQ High Wall Heat Pump Owner's Manual, Table 4 Error Codes