Cosmo / Cosmo Series
Cosmo F2 error code
F2 is part of TOSOT Direct's temperature sensor malfunction group. It means the unit is seeing an invalid temperature input and may shut down to protect itself.
- Urgency
- advisory
- Verified
- Jul 31, 2026
- Fix path
- Technician
What it means
F2 is part of TOSOT Direct's temperature sensor malfunction group. It means the unit is seeing an invalid temperature input and may shut down to protect itself.
Urgency
advisory
A single power reset is reasonable. If F2 returns, sensor and board checks are professional-only.
Likely causes
- Faulty pipe or coil temperature sensor
- Disconnected sensor plug
- Open or shorted sensor wiring
- Indoor control board sensor input fault
Homeowner fix
Turn the system off for 10 minutes, then restart once. Do not remove panels or replace the sensor yourself.
When to call a pro
Call a licensed HVAC technician if F2 returns after one reset or the indoor unit cycles incorrectly.
This code points to electrical or inverter work - get repair quotes from contractors in your area.
Get repair quotesRepair vs replace
Sensor repairs are normally repair-first items. Consider replacement only if an older unit also needs a board or refrigerant-circuit repair.
See Cosmo mini-splitsYour Cosmo model
Cosmo Series model pages in the Cosmo catalog help compare this repair path with current replacement options.
- Cosmo Series 9,100 BTU R-32 115V (GWH09AWCXB-A6DN***/I / GWH09ATCXB-A6DNA1C/O)
Cosmo Series
- Cosmo Series 9,100 BTU R-32 208/230V (GWH09AWCXB-D6DN***/I / GWH09ATCXB-D6DNA1C/O)
Cosmo Series
- Cosmo Series 12,000 BTU R-32 115V (GWH12AWCXB-A6DN***/I / GWH12ATCXB-A6DNA1A/O)
Cosmo Series
- Cosmo Series 12,000 BTU R-32 208/230V (GWH12AWCXB-D6DN***/I / GWH12ATCXB-D6DNA1A/O)
Cosmo Series
For your technician
Technician note: verify the model-specific F2 sensor, check harness and connector, compare resistance with actual coil temperature, and confirm PCB input response. Page context: Cosmo maps this display to the Cosmo Series line; source: TOSOT Direct Cosmo Series product-document manual links plus TOSOT Direct mini-split error-code guide and FAQ; display convention: match the letter F and two marker exactly before comparing neighboring codes.
Which systems show it
Cosmo Series
Sold under more than one brand
Shared with TOSOT. Cosmo and TOSOT document this code from the same manufacturer source, so F2 means the same thing on either badge and the steps above apply.
Open TOSOT F2Related troubleshooting
Use the symptom guide alongside the exact display code if the unit is flashing, cycling, or showing comfort symptoms.
Related codes
Source
- Document
- TOSOT Direct Cosmo Series product-document manual links plus TOSOT Direct mini-split error-code guide and FAQ