Cosmo F0 error code

What it means

F0 means the unit has detected a refrigerant-side protection condition. TOSOT Direct describes this as refrigerant leakage protection or cut-off protection, commonly tied to low refrigerant or a possible leak.

Urgency

Likely causes

1. Low refrigerant charge
2. Possible refrigerant leak
3. Indoor coil icing after refrigerant loss
4. Refrigerant-side protection stopping operation

Homeowner fix

Turn the unit off if you see ice or poor cooling. Check only for blocked indoor airflow and make sure the filter is clean. Do not add refrigerant, open service valves, or keep resetting the system.

When to call a pro

Call a licensed HVAC technician if F0 appears more than once, the unit is iced, or performance is weak. Tell them TOSOT Direct identifies F0 as refrigerant leakage or cut-off protection.

Repair vs replace

A refrigerant leak is usually repairable, but compare repair with replacement on an older out-of-warranty system if the leak is in a coil or multiple major parts are failing.

• Cosmo Series 9,100 BTU R-32 115V (GWH09AWCXB-A6DN***/I / GWH09ATCXB-A6DNA1C/O)

  Cosmo Series

• Cosmo Series 9,100 BTU R-32 208/230V (GWH09AWCXB-D6DN***/I / GWH09ATCXB-D6DNA1C/O)

  Cosmo Series

• Cosmo Series 12,000 BTU R-32 115V (GWH12AWCXB-A6DN***/I / GWH12ATCXB-A6DNA1A/O)

  Cosmo Series

• Cosmo Series 12,000 BTU R-32 208/230V (GWH12AWCXB-D6DN***/I / GWH12ATCXB-D6DNA1A/O)

  Cosmo Series

For your technician

Technician note: leak test, inspect flare joints and coil, verify charge by approved procedure, repair before recharge, and clear the protection only after the refrigerant fault is corrected. Page context: Cosmo maps this display to the Cosmo Series line; source: TOSOT Direct Cosmo Series product-document manual links plus TOSOT Direct mini-split error-code guide and FAQ; display convention: match the letter F and zero marker exactly before comparing neighboring codes.

Which systems show it

Cosmo Series

Sold under more than one brand

Shared with TOSOT. Cosmo and TOSOT document this code from the same manufacturer source, so F0 means the same thing on either badge and the steps above apply.

Related troubleshooting

Use the symptom guide alongside the exact display code if the unit is flashing, cycling, or showing comfort symptoms.

Related codes

Source

Next step