Della / Econo Series
Della FP error code
FP means limiting/reducing frequency for anti-condensation protection. In plain English, the unit is reducing output to prevent condensation.
- Urgency
- advisory
- Verified
- Jul 31, 2026
- Fix path
- Technician
What it means
FP means limiting/reducing frequency for anti-condensation protection. In plain English, the unit is reducing output to prevent condensation.
Urgency
advisory
Clean filters and avoid very low setpoints. Service is needed if it repeats.
Likely causes
- Very low cooling setpoint or humid room conditions
- Dirty filter or blocked indoor airflow
- Indoor coil temperature sensor or control issue
- Refrigerant/airflow condition making the coil too cold
Homeowner fix
Raise the cooling setpoint slightly, clean the user-removable filter, and make sure the indoor intake/outlet are not blocked. If it repeats, call for service.
When to call a pro
Call a licensed HVAC technician if FP returns after one safe reset or the condition will not clear. Tell them the official source lists FP as Limiting/reducing frequency for anti-condensation protection.
This code points to refrigerant or sealed-system work - get repair quotes from contractors in your area.
Get repair quotesRepair vs replace
This fault is usually repairable. Replacement is worth comparing only if an older system also needs major board, compressor, or refrigerant-circuit work.
See Della mini-splitsYour Della model
Econo Series model pages in the Della catalog help compare this repair path with current replacement options.
- Della Econo 11,500 BTU R-32 115V (048-IF-11K1VR-17S-IN / 048-IF-11K1VR-17S-OUT)
Econo Series
- Della Econo 11,500 BTU R-32 208/230V (048-IF-11K2VR-17S-IN / 048-IF-11K2VR-17S-OUT)
Econo Series
- Della Econo 17,000 BTU R-32 208/230V (048-IF-17K2VR-17S-IN / 048-IF-17K2VR-17S-OUT)
Econo Series
- Della Econo 23,000 BTU R-32 208/230V (048-IF-23K2VR-17S-IN / 048-IF-23K2VR-17S-OUT)
Econo Series
For your technician
Technician note: verify humidity/load, indoor airflow, coil temperature sensor, fan speed, refrigerant condition, and control logic. Source: Della official Econo support table, R410A lines 50-110 and R32 lines 44-104. Page context: Della maps this display to the Econo Series line; source: Della official support: Econo (lF) R410A and R32 Series Error Codes and Troubleshooting Guide; display convention: match the letter F and letter P marker exactly before comparing neighboring codes.
Which systems show it
Econo Series
Related troubleshooting
Use the symptom guide alongside the exact display code if the unit is flashing, cycling, or showing comfort symptoms.
Related codes
Source
- Document
- Della official support: Econo (lF) R410A and R32 Series Error Codes and Troubleshooting Guide