Friedrich 13 error code

What it means

The compressor discharge/exhaust temperature is too high.

Urgency

Likely causes

1. Compressor exhaust temperature sensor failed
2. Unit refrigerant charge is low

Homeowner fix

Turn the system off. Do not add refrigerant, open panels, or keep resetting the system.

When to call a pro

Call a Friedrich-qualified technician if code 13 returns. Tell them the service manual lists compressor exhaust temperature too high protection.

Repair vs replace

Discharge-temperature faults may involve sensor or refrigerant diagnosis; compare sealed-system repair with replacement on older systems.

• Friedrich Floating Air Pro 9,000 BTU R-454B 115V (FAHSW09A1C / FPHSR09A1C)

  Floating Air Pro

• Friedrich Floating Air Pro 9,000 BTU R-454B 208/230V (FAHFW09A3D / FPHSR09A3D)

  Floating Air Pro

• Friedrich Floating Air Pro 12,000 BTU R-454B 115V (FAHSW12A1C / FPHSR12A1C)

  Floating Air Pro

• Friedrich Floating Air Pro 12,000 BTU R-454B 208/230V (FAHFW12A3D / FPHSR12A3D)

  Floating Air Pro

For your technician

Official Friedrich indoor diagnostic table, PDF p.74: code 13 - compressor exhaust temperature too high protection; causes are failed exhaust temperature sensor or low refrigerant charge. Page context: Friedrich maps this display to the Floating Air Pro line; source: Friedrich Ductless Floating Air Pro Single Zone Service Manual, R-454B Refrigerant, 96112000_00; display convention: match the thirteen marker exactly before comparing neighboring codes.

Which systems show it

Floating Air Pro

Related troubleshooting

Use the symptom guide alongside the exact display code if the unit is flashing, cycling, or showing comfort symptoms.

Related codes

Source

Next step