Samsung C467 error code

What it means

C467 is Prohibit operation condition error (HEATING) - outdoor conditions outside allowed HEATING range. The unit is stopping or limiting operation because that reading or component cannot be trusted. Manual trigger: C467 means Prohibit operation condition error (HEATING) - outdoor conditions outside allowed HEATING range.

Urgency

Likely causes

1. Temporary protection event that may clear after one reset
2. Airflow, power, or operating condition outside normal range
3. Sensor, wiring, or control feedback problem
4. Technician-only component fault identified by the service manual

Homeowner fix

Stop forcing heating and wait for outdoor conditions to return inside the allowed heating range. Keep the outdoor unit clear of snow and loose debris without removing panels, then reset once after conditions improve. Expected result: the code clears when heating is allowed.

When to call a pro

Call a licensed HVAC technician if C467 appears in mild weather, will not clear after outdoor conditions improve, or returns after one reset.

Repair vs replace

Heating prohibit is usually an operating-limit condition, not a replacement signal. If a false reading is traced to a sensor or board, compare only that repair with replacement on older equipment.

• Samsung WindFree Premium 9,000 BTU R-32 208/230V (AR09DXDABWKN / AR09DXDABWKX)

  WindFree Premium

• Samsung WindFree Premium 12,000 BTU R-32 208/230V (AR12DXDABWKN / AR12DXDABWKX)

  WindFree Premium

• Samsung WindFree Premium 15,000 BTU R-32 208/230V (AR15DXDABWKN / AR15DXDABWKX)

  WindFree Premium

• Samsung WindFree Premium 18,000 BTU R-32 208/230V (AR18DXDABWKN / AR18DXDABWKX)

  WindFree Premium

For your technician

Technician note: confirm the requested mode, published heating operating range, outdoor ambient reading, sensor placement, and PBA input before replacing parts. Page context: Samsung maps this display to the WindFree Premium line; source: Samsung WindFree Premium R-32 Service Manual; display convention: match the letter C and four hundred sixty seven marker exactly before comparing neighboring codes.

Which systems show it

• Samsung R-32 residential ductless diagnostics anchored to WindFree Premium and used as common Samsung C-code homeowner guidance for current R-32 residential mini-split coverage.

Related troubleshooting

Use the symptom guide alongside the exact display code if the unit is flashing, cycling, or showing comfort symptoms.

Reset note

Power cycle once only if the homeowner fix says it is safe; do not keep resetting a returning code.

Manual trigger

C467 means Prohibit operation condition error (HEATING) - outdoor conditions outside allowed HEATING range.

Related codes

Source

Next step