SplitAtlas

Senville / LETO Series

Senville PC00 error code

PC00 means the outdoor inverter power module reported an abnormal compressor-drive condition. It can shut the system down to protect expensive electronics and the compressor.

Urgency
advisory
Verified
Jul 31, 2026
Fix path
Technician

What it means

PC00 means the outdoor inverter power module reported an abnormal compressor-drive condition. It can shut the system down to protect expensive electronics and the compressor.

Urgency

advisory

This is not usually an immediate safety hazard, but do not keep resetting it. Try the safe homeowner check below; if the code comes back, schedule service.

Likely causes

  1. Temporary inverter drive fault
  2. Outdoor IPM module fault
  3. Outdoor fan or airflow problem increasing drive stress
  4. Compressor or outdoor PCB fault

Homeowner fix

Turn the system off with the remote, then power cycle once at the breaker or disconnect if you can do that safely. Expected result: a temporary control fault clears; if the code returns, stop resetting and schedule service.

When to call a pro

Call a licensed HVAC technician if PC00 returns after one reset. Tell them the code is outdoor IPM module protection.

This code points to compressor and electrical or inverter work - get repair quotes from contractors in your area.

Get repair quotes

Repair vs replace

This is normally a repair diagnosis, not an automatic replacement signal. If a technician confirms a major board, compressor, fan motor, or refrigerant-circuit repair on older out-of-warranty equipment, compare the quote with replacement.

See Senville mini-splits

Your Senville model

LETO Series model pages in the Senville catalog help compare this repair path with current replacement options.

Parts for this line

The parts catalog for Senville LETO Series lists 10 sourced replacement parts for this product line.

Open parts page

For your technician

Technician note: section 7.4.2.13 lists wiring mistake, IPM, outdoor fan assembly, compressor, and outdoor PCB for P6/PC00. Page context: Senville maps this display to the LETO Series line; source: Senville LETO Series Error Code Reference Guide plus official EL 0C and PC 0L support articles; display convention: match the letter P, letter C, and zero marker exactly before comparing neighboring codes.

Which systems show it

LETO Series

Related troubleshooting

Use the symptom guide alongside the exact display code if the unit is flashing, cycling, or showing comfort symptoms.

Related codes

Source

Senville LETO Series Error Code Reference Guide plus official EL 0C and PC 0L support articles
Document
Senville LETO Series Error Code Reference Guide plus official EL 0C and PC 0L support articles
Sourced Jul 2026

Next step