Toshiba Carrier E08 error code

What it means

The Toshiba Carrier table lists E08 as duplicated indoor addresses. It says the indoor address setting is wrong because the same address as the unit's own address was detected.

Urgency

Likely causes

1. Two indoor units were assigned the same address
2. Indoor address settings were not completed correctly
3. The controller or indoor PCB is seeing a duplicated self-address

Homeowner fix

Power cycle the system once if you can do that safely. Do not change address settings in the controller or on the unit.

When to call a pro

Call a licensed HVAC technician if E08 returns. Tell them Toshiba Carrier identifies E08 as duplicated indoor addresses.

Repair vs replace

Address-setting faults are normally setup corrections, not replacement decisions.

• Toshiba Carrier 26 High Wall 12,000 BTU R-454B 208/230V (RAV-HB121KRTP-UL / RAV-BP121AT2P-UL)

  Toshiba Carrier 26 High Wall

• Toshiba Carrier 26 High Wall 18,000 BTU R-454B 208/230V (RAV-HB181KRTP-UL / RAV-BP181AT2P-UL)

  Toshiba Carrier 26 High Wall

• Toshiba Carrier 26 High Wall 24,000 BTU R-454B 208/230V (RAV-HB241KRTP-UL / RAV-BP241AT2P-UL)

  Toshiba Carrier 26 High Wall

• Toshiba Carrier 26 High Wall 30,000 BTU R-454B 208/230V (RAV-HB301KRTP-UL / RAV-BP301AT2P-UL)

  Toshiba Carrier 26 High Wall

For your technician

Technician note: correct indoor address settings and verify no duplicated self-address is present in the connected system. Page context: Toshiba Carrier maps this display to the Toshiba Carrier 26 High Wall line; source: Toshiba Carrier RAV High Wall 12K-36K Installation Manual, Section 14 Troubleshooting, Error codes and parts to be checked; display convention: match the letter E and eight marker exactly before comparing neighboring codes.

Which systems show it

Toshiba Carrier 26 High Wall

Related troubleshooting

Use the symptom guide alongside the exact display code if the unit is flashing, cycling, or showing comfort symptoms.

Related codes

Source

Next step