Panasonic H 67 error code

What it means

Panasonic lists H 67 as nanoe abnormality. This is an internal air-treatment function fault.

Urgency

Likely causes

1. nanoe air-treatment module has failed
2. nanoe module connector or wiring is loose, damaged, or corroded
3. Dust or moisture contamination is affecting the nanoe module
4. Indoor control board fault in the air-treatment circuit

Homeowner fix

Turn the system off and power cycle once if safe. Do not open the indoor unit or attempt nanoe module service.

When to call a pro

Call an authorized Panasonic dealer if H 67 returns. Tell them Panasonic lists H 67 as nanoe abnormality.

Repair vs replace

Air-treatment faults are usually repairable and rarely justify replacement by themselves.

• Panasonic ClimaPure XZ Series 9,000 BTU R-32 208/230V (CS-XZ9AKUAW / CU-XZ9AKUAC)

  ClimaPure XZ Series

• Panasonic ClimaPure XZ Series 12,000 BTU R-32 208/230V (CS-XZ12AKUAW / CU-XZ12AKUAC)

  ClimaPure XZ Series

• Panasonic ClimaPure XZ Series 15,000 BTU R-32 208/230V (CS-XZ15AKUAW / CU-XZ15AKUAC)

  ClimaPure XZ Series

• Panasonic ClimaPure XZ Series 18,000 BTU R-32 208/230V (CS-XZ18AKUAW / CU-XZ18AKUAC)

  ClimaPure XZ Series

For your technician

Official Panasonic diagnostic display: H 67 - nanoe abnormality. Page context: Panasonic maps this display to the ClimaPure XZ Series line; source: Panasonic Operating Instructions Air Conditioner CS-XZ, CS-MXZ, CU-XZ, CU-xZxxABUC and CU-xZxxBBUC Series, English, ACXF55-35103; display convention: match the letter H and sixty seven marker exactly before comparing neighboring codes.

Which systems show it

ClimaPure XZ Series

Related troubleshooting

Use the symptom guide alongside the exact display code if the unit is flashing, cycling, or showing comfort symptoms.

Related codes

Source

Next step