Can I install the GREE Livo R32 9,000 BTU (230V) myself, or do I need a pro?

GREE Livo R32 9,000 BTU (230V) is built for professional installation: the line set must be flared, evacuated, and charged, which requires EPA-certified refrigerant handling. Installing it outside the manufacturer's requirements can void the warranty, so budget for a qualified HVAC installer.

Will the GREE Livo R32 9,000 BTU (230V) keep heating in a cold winter?

The manufacturer publishes 7,600 BTU/h of heating output at 5F. Rated heating operation extends down to -13 F. Certified heating efficiency is 8.8 HSPF2. Match those numbers against your climate's design temperature - in cold regions, output at 5F matters far more than the nameplate capacity measured at 47F.

What electrical circuit does the GREE Livo R32 9,000 BTU (230V) need?

Published electrical requirements: 208-230V voltage, 10 A minimum circuit ampacity, and 15 A maximum breaker or fuse sizing. Confirm the final circuit against the unit nameplate and local code with a licensed electrician.

How far can the outdoor unit be from the indoor head?

The published maximum line-set length is 66 ft, and the included line set comes pre-charged for 25 ft. Longer runs than the included set allows typically mean added refrigerant and a pro visit, so measure the planned routing before ordering.

What warranty does the GREE Livo R32 9,000 BTU (230V) carry?

The manufacturer publishes 5 years parts coverage and 7 years compressor coverage. Registration requirements and proof of qualified installation commonly affect coverage, so read the warranty terms before install day.

GREE Livo R32 9,000 BTU (230V) Specs, Price & Review

GREE Livo R32 9,000 BTU (230V) review summary

The Gree Livo 9k is the value entry into a big-name unit: Gree is one of the largest heat-pump manufacturers in the world, and the Livo is its budget wall-mount line. At around $1,300 it certifies solid mild-climate efficiency (SEER2 20.5, EER2 12.5) on the current R32 refrigerant, with a professional install - this is a flared, evacuated line-set unit, not a DIY quick-connect system.

Rated cooling

9,100BTU/hVerified - AHRI certificate

Rated heating

10,000BTU/hVerified - AHRI certificate

GREE Livo R32 9,000 BTU (230V) best-fit use cases

Budget-focused buyers in mild-winter climates who are hiring an installer anyway and want a current-refrigerant unit from a major manufacturer at the lowest reasonable price.

GREE Livo R32 9,000 BTU (230V) specifications

Manufacturer: GREE
Brand: GREE
Product line: Livo R32
Model number: LIV09HP230V1R32AH indoor / LIV09HP230V1R32AO outdoor
Indoor unit model: LIV09HP230V1R32AH
Outdoor unit model: LIV09HP230V1R32AO
Number of zones: 1
Max indoor units: not published
Rated cooling capacity: 9,100 BTU/hVerified - AHRI certificate
Rated heating capacity: 10,000 BTU/hVerified - AHRI certificate
Voltage: 208-230VVerified - manufacturer technical document
MCA: 10 AVerified - manufacturer technical document
Maximum fuse or breaker size: 15 AVerified - manufacturer technical document
Breaker needed: not published
SEER2: 20.5 SEER2Verified - AHRI certificate
EER2: 12.5 EER2Verified - AHRI certificate
HSPF2 (Region 4): 8.8 HSPF2Verified - AHRI certificate
HSPF2 (Region 5): not published
COP: not published
COP at 47F: not published
COP at 5F: 1.94 COPVerified - AHRI directory
Minimum outdoor heating temperature: -13 FVerified - manufacturer technical document
Minimum outdoor cooling temperature: 0 FVerified - manufacturer technical document
Maximum outdoor temperature: 118 FVerified - manufacturer technical document
Indoor noise range: 24 - 41Verified - manufacturer technical document
Outdoor noise rating: 51 dBAVerified - manufacturer technical document
Indoor weight: 19.8 lbVerified - manufacturer technical document
Outdoor weight: 52.9 lbVerified - manufacturer technical document
Refrigerant: R32Verified - manufacturer technical document
Refrigerant charge: 18.7 ozVerified - manufacturer technical document
Manufacturer coverage: not published
Line-set size: 1/4 in liquid / 3/8 in suction
Included line-set length: not published
Maximum line-set length: 66 ftVerified - manufacturer technical document
Max line set per indoor: not published
Maximum elevation difference: 40 ftVerified - manufacturer technical document
Max height between indoor units: not published
Wi-Fi support: supportedVerified - manufacturer technical document
Energy Star status: yesVerified - AHRI directory
AHRI certification number: 214779524Verified - AHRI certificate
Warranty: 5 years parts / 7 years compressor. Standard residential warranty: 5 years parts, 7 years compressor. GREE Select Dealer registration can extend complete systems to 10 years parts and compressor.
DIY installation status: Professional install
Retail price: $1,321.00
Installation type: Professional install
Available retailers: HVACDirect
Manual links: AHRI certificate 214779524 for LIV09HP230V1R32AO / LIV09HP230V1R32AH, AHRI Directory public details for GREE Livo/Vireo R32 pairings, GREE Livo R32 extended ratings, Livo R32 Installation and Owner's Manual - Outdoor Unit, HVACDirect product page GREE Livo R32 9,000 BTU (230V) full HTML, HVACDirect product page GREE Livo R32 9,000 BTU (230V), GREE Livo R32 sales brochure, GREE Livo R32 service manual, GREE Livo R32 submittal 9MBH 230V, GREE DFS Limited Warranty Statement for units installed after 12/31/2021
Specification sheet: GREE Livo R32 submittal 9MBH 230V
Last verified date: Jul 21, 2026

Some retailer links may earn us a commission at no extra cost; paid relationships never change scores or recommendations. Affiliate disclosure

Paid link

Check price at HVACDirect

$1,321 / Fresh price - checked Jul 21, 2026

GREE Livo R32 9,000 BTU (230V) strengths

Low price for a current-generation R32 system from a major manufacturer.
Respectable certified cooling efficiency for the tier (SEER2 20.5 / EER2 12.5).
Low 10 A minimum circuit ampacity.
Backed by a 5-year parts / 7-year compressor warranty.

GREE Livo R32 9,000 BTU (230V) weaknesses

Professional installation required: flared connections, evacuation, and refrigerant handling are not DIY tasks, and the warranty expects qualified installation.
Heating tops out at a -13F operating floor and a modest HSPF2 of 8.8 - fine for mild winters, not a cold-climate heater.
Efficiency trails premium lines like Gree's own Vireo by a wide margin.

GREE Livo R32 9,000 BTU (230V) climate suitability

Minimum heating ambient: -13 FVerified - manufacturer technical document
Rated heating at 5F: 7,600 BTU/hVerified - AHRI directory
Rated heating at 17F: 9,600 BTU/hVerified - AHRI directory
Rated heating at 47F: 10,000 BTU/hVerified - AHRI certificate

GREE Livo R32 9,000 BTU (230V) electrical requirements

Voltage: not published
Voltage range: 208-230VVerified - manufacturer technical document
Phase: 1Verified - manufacturer technical document
Frequency: 60 HzVerified - manufacturer technical document
MCA: 10 AVerified - manufacturer technical document
Breaker needed: not published
Maximum breaker size: not published
Maximum fuse size: 15 AVerified - manufacturer technical document
Maximum cooling current: not published
Maximum heating current: not published
Manufacturer wire notes: Main power wire per local code; interconnecting wire size 14 AWG / 4Verified - manufacturer technical document

GREE Livo R32 9,000 BTU (230V) installation considerations

Liquid line: 1/4 inVerified - manufacturer technical document
Suction line: 3/8 inVerified - manufacturer technical document
Precharged length: 25 ftVerified - manufacturer technical document
Included line-set length: not published
Maximum line-set length: 66 ftVerified - manufacturer technical document
Max line set per indoor: not published
Max height between indoor units: not published
Indoor dimensions: 32.875 in W x 10.828125 in H x 7.875 in DVerified - manufacturer technical document
Outdoor dimensions: 28.8125 in W x 21.875 in H x 12.984375 in DVerified - manufacturer technical document
Indoor weight: 19.8 lbVerified - manufacturer technical document
Outdoor weight: 52.9 lbVerified - manufacturer technical document
Drain size: not published

GREE Livo R32 9,000 BTU (230V) related systems and guides

Frequently asked questions

Can I install the GREE Livo R32 9,000 BTU (230V) myself, or do I need a pro?: GREE Livo R32 9,000 BTU (230V) is built for professional installation: the line set must be flared, evacuated, and charged, which requires EPA-certified refrigerant handling. Installing it outside the manufacturer's requirements can void the warranty, so budget for a qualified HVAC installer.
Will the GREE Livo R32 9,000 BTU (230V) keep heating in a cold winter?: The manufacturer publishes 7,600 BTU/h of heating output at 5F. Rated heating operation extends down to -13 F. Certified heating efficiency is 8.8 HSPF2. Match those numbers against your climate's design temperature - in cold regions, output at 5F matters far more than the nameplate capacity measured at 47F.
What electrical circuit does the GREE Livo R32 9,000 BTU (230V) need?: Published electrical requirements: 208-230V voltage, 10 A minimum circuit ampacity, and 15 A maximum breaker or fuse sizing. Confirm the final circuit against the unit nameplate and local code with a licensed electrician.
How far can the outdoor unit be from the indoor head?: The published maximum line-set length is 66 ft, and the included line set comes pre-charged for 25 ft. Longer runs than the included set allows typically mean added refrigerant and a pro visit, so measure the planned routing before ordering.
What warranty does the GREE Livo R32 9,000 BTU (230V) carry?: The manufacturer publishes 5 years parts coverage and 7 years compressor coverage. Registration requirements and proof of qualified installation commonly affect coverage, so read the warranty terms before install day.

GREE Livo R32 9,000 BTU (230V) data sources

GREE Comfort: GREE Livo R32 submittal 9MBH 230VVerified - manufacturer technical document
Covers Frequency, electrical_spec.guaranteed_voltage_range, Maximum fuse size, Minimum circuit ampacity, Phase, electrical_spec.rated_current_cooling_amps and more
AHRI: AHRI certificate 214779524 for LIV09HP230V1R32AO / LIV09HP230V1R32AHVerified - AHRI certificate
Covers AHRI certification number, Rated cooling capacity, EER2, Rated heating capacity, HSPF2 (Region 4), Rated heating at 47F and more
AHRI: AHRI Directory public details for GREE Livo/Vireo R32 pairingsVerified - AHRI directory
Covers COP at 5F, performance_spec.energy_star_cold_climate_designation, Energy Star status, Rated heating at 17F, Rated heating at 5F
HVACDirect: HVACDirect product page GREE Livo R32 9,000 BTU (230V)Verified - authorized distributor
Covers Retail price
GREE Comfort: Livo R32 Installation and Owner's Manual - Outdoor UnitVerified - manufacturer technical document
Covers system.diy_status, system.installation_type
GREE Comfort: GREE DFS Limited Warranty Statement for units installed after 12/31/2021Verified - secondary source
Covers Compressor warranty, Parts warranty
GREE Comfort: GREE Licensed Contractor Warranty ProgramVerified - secondary source
Covers Warranty notes

GREE Livo R32 9,000 BTU (230V) last updated

Jul 21, 2026